Carrito (0)
28BYJ-48 Stepper Motor 5V
€1.35
Tax included
€1.75
€0.40
The 28BYJ-48 is a small, cheap, 5 volt geared stepping motors. These stepping motors are apparently widely used to control things like automated blinds, A/C units and are mass produced.
Te quedan 120€ para el envío gratis
24h Delivery
FREE for orders over 120€
Secure payment
Somos de confianza:
Usually joint purchase
28BYJ-48 Stepper Motor 5V
€1.35
€1.75
€0.40
€0.50
Información del producto
| Motor Type | Unipolar stepper motor |
| Connection Type | 5 Wire Connection (to the motor controller) |
| Voltage | 5 Volts DC |
| Frequency | 100 Hz |
| Step mode | Half-step mode recommended (8 step control signal sequence) |
| Step angle | Half-step mode: 8 step control signal sequence (recommended) 5.625 degrees per step / 64 steps per one revolution of the internal motor shaftFull Step mode: 4 step control signal sequence 11.25 degrees per step / 32 steps per one revolution of the internal motor shaft |
| Gear ratio | Manufacturer specifies 64:1. Some patient and diligent people on the Arduino forumshave disassembled the gear train of these little motors and determined that the exact gear ratio is in fact 63.68395:1. My observations confirm their findings. These means that in the recommended half-step mode we will have:64 steps per motor rotation x 63.684 gear ratio = 4076 steps per full revolution (approximately). |
| Wiring to the ULN2003 controller | A (Blue), B (Pink), C (Yellow), D (Orange), E (Red, Mid-Point) |
| Weight | 30g |
28byj48
132 Items
Información adicional
