XTC-3D / 181gr View full size

XTC-3D / 181gr

Reference: xtc3d181

Liquid coating applied by brush on 3D printed pieces. Covering all surfaces. A + B = 181gr.

More details

Notify me when available

Availability: This product is no longer in stock

15,95 €

By buying this product you can collect up to 1 loyalty point. Your cart will total 1 point that can be converted into a voucher of 0,20 €.


XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.

Inexpensive to Use: 1 oz covers 100+ square inches.

90% Time & Labor Savings: XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated.

Coat any 3D Print Surface: XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.

XTC-3D® does not contain VOC's, phthalates or phosphates.

Accessories

30 other products in the same category:

Customers who bought this product also bought: